/* mga_drv.h -- Private header for the Matrox G200/G400 driver -*- linux-c -*- * Created: Mon Dec 13 01:50:01 1999 by jhartmann@precisioninsight.com * * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All rights reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: * Gareth Hughes */ #ifndef __MGA_DRV_H__ #define __MGA_DRV_H__ /* General customization: */ #define DRIVER_AUTHOR "Gareth Hughes, VA Linux Systems Inc." #define DRIVER_NAME "mga" #define DRIVER_DESC "Matrox G200/G400" #define DRIVER_DATE "20060319" #define DRIVER_MAJOR 3 #define DRIVER_MINOR 2 #define DRIVER_PATCHLEVEL 2 typedef struct drm_mga_primary_buffer { u8 *start; u8 *end; int size; u32 tail; int space; volatile long wrapped; volatile u32 *status; u32 last_flush; u32 last_wrap; u32 high_mark; } drm_mga_primary_buffer_t; typedef struct drm_mga_freelist { struct drm_mga_freelist *next; struct drm_mga_freelist *prev; drm_mga_age_t age; drm_buf_t *buf; } drm_mga_freelist_t; typedef struct { drm_mga_freelist_t *list_entry; int discard; int dispatched; } drm_mga_buf_priv_t; typedef struct drm_mga_private { drm_mga_primary_buffer_t prim; drm_mga_sarea_t *sarea_priv; drm_mga_freelist_t *head; drm_mga_freelist_t *tail; unsigned int warp_pipe; unsigned long warp_pipe_phys[MGA_MAX_WARP_PIPES]; int chipset; int usec_timeout; /** * If set, the new DMA initialization sequence was used. This is * primarilly used to select how the driver should uninitialized its * internal DMA structures. */ int used_new_dma_init; /** * If AGP memory is used for DMA buffers, this will be the value * \c MGA_PAGPXFER. Otherwise, it will be zero (for a PCI transfer). */ u32 dma_access; /** * If AGP memory is used for DMA buffers, this will be the value * \c MGA_WAGP_ENABLE. Otherwise, it will be zero (for a PCI * transfer). */ u32 wagp_enable; /** * \name MMIO region parameters. * * \sa drm_mga_private_t::mmio */ /*@{*/ u32 mmio_base; /**< Bus address of base of MMIO. */ u32 mmio_size; /**< Size of the MMIO region. */ /*@}*/ u32 clear_cmd; u32 maccess; wait_queue_head_t fence_queue; atomic_t last_fence_retired; u32 next_fence_to_post; unsigned int fb_cpp; unsigned int front_offset; unsigned int front_pitch; unsigned int back_offset; unsigned int back_pitch; unsigned int depth_cpp; unsigned int depth_offset; unsigned int depth_pitch; unsigned int texture_offset; unsigned int texture_size; drm_local_map_t *sarea; drm_local_map_t *mmio; drm_local_map_t *status; drm_local_map_t *warp; drm_local_map_t *primary; drm_local_map_t *agp_textures; unsigned long agp_handle; unsigned int agp_size; } drm_mga_private_t; extern drm_ioctl_desc_t mga_ioctls[]; extern int mga_max_ioctl; /* mga_dma.c */ extern int mga_dma_bootstrap(DRM_IOCTL_ARGS); extern int mga_dma_init(DRM_IOCTL_ARGS); extern int mga_dma_flush(DRM_IOCTL_ARGS); extern int mga_dma_reset(DRM_IOCTL_ARGS); extern int mga_dma_buffers(DRM_IOCTL_ARGS); extern int mga_driver_load(drm_device_t *dev, unsigned long flags); extern int mga_driver_unload(drm_device_t * dev); extern void mga_driver_lastclose(drm_device_t * dev); extern int mga_driver_dma_quiescent(drm_device_t * dev); extern int mga_do_wait_for_idle(drm_mga_private_t * dev_priv); extern void mga_do_dma_flush(drm_mga_private_t * dev_priv); extern void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv); extern void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv); extern int mga_freelist_put(drm_device_t * dev, drm_buf_t * buf); /* mga_warp.c */ extern unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv); extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv); extern int mga_warp_init(drm_mga_private_t * dev_priv); /* mga_irq.c */ extern int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence); extern int mga_driver_vblank_wait(drm_device_t * dev, unsigned int *sequence); extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS); extern void mga_driver_irq_preinstall(drm_device_t * dev); extern void mga_driver_irq_postinstall(drm_device_t * dev); extern void mga_driver_irq_uninstall(drm_device_t * dev); extern long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #define mga_flush_write_combine() DRM_WRITEMEMORYBARRIER() #if defined(__linux__) && defined(__alpha__) #define MGA_BASE( reg ) ((unsigned long)(dev_priv->mmio->handle)) #define MGA_ADDR( reg ) (MGA_BASE(reg) + reg) #define MGA_DEREF( reg ) *(volatile u32 *)MGA_ADDR( reg ) #define MGA_DEREF8( reg ) *(volatile u8 *)MGA_ADDR( reg ) #define MGA_READ( reg ) (_MGA_READ((u32 *)MGA_ADDR(reg))) #define MGA_READ8( reg ) (_MGA_READ((u8 *)MGA_ADDR(reg))) #define MGA_WRITE( reg, val ) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF( reg ) = val; } while (0) #define MGA_WRITE8( reg, val ) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8( reg ) = val; } while (0) static inline u32 _MGA_READ(u32 * addr) { DRM_MEMORYBARRIER(); return *(volatile u32 *)addr; } #else #define MGA_READ8( reg ) DRM_READ8(dev_priv->mmio, (reg)) #define MGA_READ( reg ) DRM_READ32(dev_priv->mmio, (reg)) #define MGA_WRITE8( reg, val ) DRM_WRITE8(dev_priv->mmio, (reg), (val)) #define MGA_WRITE( reg, val ) DRM_WRITE32(dev_priv->mmio, (reg), (val)) #endif #define DWGREG0 0x1c00 #define DWGREG0_END 0x1dff #define DWGREG1 0x2c00 #define DWGREG1_END 0x2dff #define ISREG0(r) (r >= DWGREG0 && r <= DWGREG0_END) #define DMAREG0(r) (u8)((r - DWGREG0) >> 2) #define DMAREG1(r) (u8)(((r - DWGREG1) >> 2) | 0x80) #define DMAREG(r) (ISREG0(r) ? DMAREG0(r) : DMAREG1(r)) /* ================================================================ * Helper macross... */ #define MGA_EMIT_STATE( dev_priv, dirty ) \ do { \ if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) { \ if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) { \ mga_g400_emit_state( dev_priv ); \ } else { \ mga_g200_emit_state( dev_priv ); \ } \ } \ } while (0) #define WRAP_TEST_WITH_RETURN( dev_priv ) \ do { \ if ( test_bit( 0, &dev_priv->prim.wrapped ) ) { \ if ( mga_is_idle( dev_priv ) ) { \ mga_do_dma_wrap_end( dev_priv ); \ } else if ( dev_priv->prim.space < \ dev_priv->prim.high_mark ) { \ if ( MGA_DMA_DEBUG ) \ DRM_INFO( "%s: wrap...\n", __FUNCTION__ ); \ return DRM_ERR(EBUSY); \ } \ } \ } while (0) #define WRAP_WAIT_WITH_RETURN( dev_priv ) \ do { \ if ( test_bit( 0, &dev_priv->prim.wrapped ) ) { \ if ( mga_do_wait_for_idle( dev_priv ) < 0 ) { \ if ( MGA_DMA_DEBUG ) \ DRM_INFO( "%s: wrap...\n", __FUNCTION__ ); \ return DRM_ERR(EBUSY); \ } \ mga_do_dma_wrap_end( dev_priv ); \ } \ } while (0) /* ================================================================ * Primary DMA command stream */ #define MGA_VERBOSE 0 #define DMA_LOCALS unsigned int write; volatile u8 *prim; #define DMA_BLOCK_SIZE (5 * sizeof(u32)) #define BEGIN_DMA( n ) \ do { \ if ( MGA_VERBOSE ) { \ DRM_INFO( "BEGIN_DMA( %d ) in %s\n", \ (n), __FUNCTION__ ); \ DRM_INFO( " space=0x%x req=0x%Zx\n", \ dev_priv->prim.space, (n) * DMA_BLOCK_SIZE ); \ } \ prim = dev_priv->prim.start; \ write = dev_priv->prim.tail; \ } while (0) #define BEGIN_DMA_WRAP() \ do { \ if ( MGA_VERBOSE ) { \ DRM_INFO( "BEGIN_DMA() in %s\n", __FUNCTION__ ); \ DRM_INFO( " space=0x%x\n", dev_priv->prim.space ); \ } \ prim = dev_priv->prim.start; \ write = dev_priv->prim.tail; \ } while (0) #define ADVANCE_DMA() \ do { \ dev_priv->prim.tail = write; \ if ( MGA_VERBOSE ) { \ DRM_INFO( "ADVANCE_DMA() tail=0x%05x sp=0x%x\n", \ write, dev_priv->prim.space ); \ } \ } while (0) #define FLUSH_DMA() \ do { \ if ( 0 ) { \ DRM_INFO( "%s:\n", __FUNCTION__ ); \ DRM_INFO( " tail=0x%06x head=0x%06lx\n", \ dev_priv->prim.tail, \ MGA_READ( MGA_PRIMADDRESS ) - \ dev_priv->primary->offset ); \ } \ if ( !test_bit( 0, &dev_priv->prim.wrapped ) ) { \ if ( dev_priv->prim.space < \ dev_priv->prim.high_mark ) { \ mga_do_dma_wrap_start( dev_priv ); \ } else { \ mga_do_dma_flush( dev_priv ); \ } \ } \ } while (0) /* Never use this, always use DMA_BLOCK(...) for primary DMA output. */ #define DMA_WRITE( offset, val ) \ do { \ if ( MGA_VERBOSE ) { \ DRM_INFO( " DMA_WRITE( 0x%08x ) at 0x%04Zx\n", \ (u32)(val), write + (offset) * sizeof(u32) ); \ } \ *(volatile u32 *)(prim + write + (offset) * sizeof(u32)) = val; \ } while (0) #define DMA_BLOCK( reg0, val0, reg1, val1, reg2, val2, reg3, val3 ) \ do { \ DMA_WRITE( 0, ((DMAREG( reg0 ) << 0) | \ (DMAREG( reg1 ) << 8) | \ (DMAREG( reg2 ) << 16) | \ (DMAREG( reg3 ) << 24)) ); \ DMA_WRITE( 1, val0 ); \ DMA_WRITE( 2, val1 ); \ DMA_WRITE( 3, val2 ); \ DMA_WRITE( 4, val3 ); \ write += DMA_BLOCK_SIZE; \ } while (0) /* Buffer aging via primary DMA stream head pointer. */ #define SET_AGE( age, h, w ) \ do { \ (age)->head = h; \ (age)->wrap = w; \ } while (0) #define TEST_AGE( age, h, w ) ( (age)->wrap < w || \ ( (age)->wrap == w && \ (age)->head < h ) ) #define AGE_BUFFER( buf_priv ) \ do { \ drm_mga_freelist_t *entry = (buf_priv)->list_entry; \ if ( (buf_priv)->dispatched ) { \ entry->age.head = (dev_priv->prim.tail + \ dev_priv->primary->offset); \ entry->age.wrap = dev_priv->sarea_priv->last_wrap; \ } else { \ entry->age.head = 0; \ entry->age.wrap = 0; \ } \ } while (0) #define MGA_ENGINE_IDLE_MASK (MGA_SOFTRAPEN | \ MGA_DWGENGSTS | \ MGA_ENDPRDMASTS) #define MGA_DMA_IDLE_MASK (MGA_SOFTRAPEN | \ MGA_ENDPRDMASTS) #define MGA_DMA_DEBUG 0 /* A reduced set of the mga registers. */ #define MGA_CRTC_INDEX 0x1fd4 #define MGA_CRTC_DATA 0x1fd5 /* CRTC11 */ #define MGA_VINTCLR (1 << 4) #define MGA_VINTEN (1 << 5) #define MGA_ALPHACTRL 0x2c7c #define MGA_AR0 0x1c60 #define MGA_AR1 0x1c64 #define MGA_AR2 0x1c68 #define MGA_AR3 0x1c6c #define MGA_AR4 0x1c70 #define MGA_AR5 0x1c74 #define MGA_AR6 0x1c78 #define MGA_CXBNDRY 0x1c80 #define MGA_CXLEFT 0x1ca0 #define MGA_CXRIGHT 0x1ca4 #define MGA_DMAPAD 0x1c54 #define MGA_DSTORG 0x2cb8 #define MGA_DWGCTL 0x1c00 # define MGA_OPCOD_MASK (15 << 0) # define MGA_OPCOD_TRAP (4 << 0) # define MGA_OPCOD_TEXTURE_TRAP (6 << 0) # define MGA_OPCOD_BITBLT (8 << 0) # define MGA_OPCOD_ILOAD (9 << 0) # define MGA_ATYPE_MASK (7 << 4) # define MGA_ATYPE_RPL (0 << 4) # define MGA_ATYPE_RSTR (1 << 4) # define MGA_ATYPE_ZI (3 << 4) # define MGA_ATYPE_BLK (4 << 4) # define MGA_ATYPE_I (7 << 4) # define MGA_LINEAR (1 << 7) # define MGA_ZMODE_MASK (7 << 8) # define MGA_ZMODE_NOZCMP (0 << 8) # define MGA_ZMODE_ZE (2 << 8) # define MGA_ZMODE_ZNE (3 << 8) # define MGA_ZMODE_ZLT (4 << 8) # define MGA_ZMODE_ZLTE (5 << 8) # define MGA_ZMODE_ZGT (6 << 8) # define MGA_ZMODE_ZGTE (7 << 8) # define MGA_SOLID (1 << 11) # define MGA_ARZERO (1 << 12) # define MGA_SGNZERO (1 << 13) # define MGA_SHIFTZERO (1 << 14) # define MGA_BOP_MASK (15 << 16) # define MGA_BOP_ZERO (0 << 16) # define MGA_BOP_DST (10 << 16) # define MGA_BOP_SRC (12 << 16) # define MGA_BOP_ONE (15 << 16) # define MGA_TRANS_SHIFT 20 # define MGA_TRANS_MASK (15 << 20) # define MGA_BLTMOD_MASK (15 << 25) # define MGA_BLTMOD_BMONOLEF (0 << 25) # define MGA_BLTMOD_BMONOWF (4 << 25) # define MGA_BLTMOD_PLAN (1 << 25) # define MGA_BLTMOD_BFCOL (2 << 25) # define MGA_BLTMOD_BU32BGR (3 << 25) # define MGA_BLTMOD_BU32RGB (7 << 25) # define MGA_BLTMOD_BU24BGR (11 << 25) # define MGA_BLTMOD_BU24RGB (15 << 25) # define MGA_PATTERN (1 << 29) # define MGA_TRANSC (1 << 30) # define MGA_CLIPDIS (1 << 31) #define MGA_DWGSYNC 0x2c4c #define MGA_FCOL 0x1c24 #define MGA_FIFOSTATUS 0x1e10 #define MGA_FOGCOL 0x1cf4 #define MGA_FXBNDRY 0x1c84 #define MGA_FXLEFT 0x1ca8 #define MGA_FXRIGHT 0x1cac #define MGA_ICLEAR 0x1e18 # define MGA_SOFTRAPICLR (1 << 0) # define MGA_VLINEICLR (1 << 5) #define MGA_IEN 0x1e1c # define MGA_SOFTRAPIEN (1 << 0) # define MGA_VLINEIEN (1 << 5) #define MGA_LEN 0x1c5c #define MGA_MACCESS 0x1c04 #define MGA_PITCH 0x1c8c #define MGA_PLNWT 0x1c1c #define MGA_PRIMADDRESS 0x1e58 # define MGA_DMA_GENERAL (0 << 0) # define MGA_DMA_BLIT (1 << 0) # define MGA_DMA_VECTOR (2 << 0) # define MGA_DMA_VERTEX (3 << 0) #define MGA_PRIMEND 0x1e5c # define MGA_PRIMNOSTART (1 << 0) # define MGA_PAGPXFER (1 << 1) #define MGA_PRIMPTR 0x1e50 # define MGA_PRIMPTREN0 (1 << 0) # define MGA_PRIMPTREN1 (1 << 1) #define MGA_RST 0x1e40 # define MGA_SOFTRESET (1 << 0) # define MGA_SOFTEXTRST (1 << 1) #define MGA_SECADDRESS 0x2c40 #define MGA_SECEND 0x2c44 #define MGA_SETUPADDRESS 0x2cd0 #define MGA_SETUPEND 0x2cd4 #define MGA_SGN 0x1c58 #define MGA_SOFTRAP 0x2c48 #define MGA_SRCORG 0x2cb4 # define MGA_SRMMAP_MASK (1 << 0) # define MGA_SRCMAP_FB (0 << 0) # define MGA_SRCMAP_SYSMEM (1 << 0) # define MGA_SRCACC_MASK (1 << 1) # define MGA_SRCACC_PCI (0 << 1) # define MGA_SRCACC_AGP (1 << 1) #define MGA_STATUS 0x1e14 # define MGA_SOFTRAPEN (1 << 0) # define MGA_VSYNCPEN (1 << 4) # define MGA_VLINEPEN (1 << 5) # define MGA_DWGENGSTS (1 << 16) # define MGA_ENDPRDMASTS (1 << 17) #define MGA_STENCIL 0x2cc8 #define MGA_STENCILCTL 0x2ccc #define MGA_TDUALSTAGE0 0x2cf8 #define MGA_TDUALSTAGE1 0x2cfc #define MGA_TEXBORDERCOL 0x2c5c #define MGA_TEXCTL 0x2c30 #define MGA_TEXCTL2 0x2c3c # define MGA_DUALTEX (1 << 7) # define MGA_G400_TC2_MAGIC (1 << 15) # define MGA_MAP1_ENABLE (1 << 31) #define MGA_TEXFILTER 0x2c58 #define MGA_TEXHEIGHT 0x2c2c #define MGA_TEXORG 0x2c24 # define MGA_TEXORGMAP_MASK (1 << 0) # define MGA_TEXORGMAP_FB (0 << 0) # define MGA_TEXORGMAP_SYSMEM (1 << 0) # define MGA_TEXORGACC_MASK (1 << 1) # define MGA_TEXORGACC_PCI (0 << 1) # define MGA_TEXORGACC_AGP (1 << 1) #define MGA_TEXORG1 0x2ca4 #define MGA_TEXORG2 0x2ca8 #define MGA_TEXORG3 0x2cac #define MGA_TEXORG4 0x2cb0 #define MGA_TEXTRANS 0x2c34 #define MGA_TEXTRANSHIGH 0x2c38 #define MGA_TEXWIDTH 0x2c28 #define MGA_WACCEPTSEQ 0x1dd4 #define MGA_WCODEADDR 0x1e6c #define MGA_WFLAG 0x1dc4 #define MGA_WFLAG1 0x1de0 #define MGA_WFLAGNB 0x1e64 #define MGA_WFLAGNB1 0x1e08 #define MGA_WGETMSB 0x1dc8 #define MGA_WIADDR 0x1dc0 #define MGA_WIADDR2 0x1dd8 # define MGA_WMODE_SUSPEND (0 << 0) # define MGA_WMODE_RESUME (1 << 0) # define MGA_WMODE_JUMP (2 << 0) # define MGA_WMODE_START (3 << 0) # define MGA_WAGP_ENABLE (1 << 2) #define MGA_WMISC 0x1e70 # define MGA_WUCODECACHE_ENABLE (1 << 0) # define MGA_WMASTER_ENABLE (1 << 1) # define MGA_WCACHEFLUSH_ENABLE (1 << 3) #define MGA_WVRTXSZ 0x1dcc #define MGA_YBOT 0x1c9c #define MGA_YDST 0x1c90 #define MGA_YDSTLEN 0x1c88 #define MGA_YDSTORG 0x1c94 #define MGA_YTOP 0x1c98 #define MGA_ZORG 0x1c0c /* This finishes the current batch of commands */ #define MGA_EXEC 0x0100 /* AGP PLL encoding (for G200 only). */ #define MGA_AGP_PLL 0x1e4c # define MGA_AGP2XPLL_DISABLE (0 << 0) # define MGA_AGP2XPLL_ENABLE (1 << 0) /* Warp registers */ #define MGA_WR0 0x2d00 #define MGA_WR1 0x2d04 #define MGA_WR2 0x2d08 #define MGA_WR3 0x2d0c #define MGA_WR4 0x2d10 #define MGA_WR5 0x2d14 #define MGA_WR6 0x2d18 #define MGA_WR7 0x2d1c #define MGA_WR8 0x2d20 #define MGA_WR9 0x2d24 #define MGA_WR10 0x2d28 #define MGA_WR11 0x2d2c #define MGA_WR12 0x2d30 #define MGA_WR13 0x2d34 #define MGA_WR14 0x2d38 #define MGA_WR15 0x2d3c #define MGA_WR16 0x2d40 #define MGA_WR17 0x2d44 #define MGA_WR18 0x2d48 #define MGA_WR19 0x2d4c #define MGA_WR20 0x2d50 #define MGA_WR21 0x2d54 #define MGA_WR22 0x2d58 #define MGA_WR23 0x2d5c #define MGA_WR24 0x2d60 #define MGA_WR25 0x2d64 #define MGA_WR26 0x2d68 #define MGA_WR27 0x2d6c #define MGA_WR28 0x2d70 #define MGA_WR29 0x2d74 #define MGA_WR30 0x2d78 #define MGA_WR31 0x2d7c #define MGA_WR32 0x2d80 #define MGA_WR33 0x2d84 #define MGA_WR34 0x2d88 #define MGA_WR35 0x2d8c #define MGA_WR36 0x2d90 #define MGA_WR37 0x2d94 #define MGA_WR38 0x2d98 #define MGA_WR39 0x2d9c #define MGA_WR40 0x2da0 #define MGA_WR41 0x2da4 #define MGA_WR42 0x2da8 #define MGA_WR43 0x2dac #define MGA_WR44 0x2db0 #define MGA_WR45 0x2db4 #define MGA_WR46 0x2db8 #define MGA_WR47 0x2dbc #define MGA_WR48 0x2dc0 #define MGA_WR49 0x2dc4 #define MGA_WR50 0x2dc8 #define MGA_WR51 0x2dcc #define MGA_WR52 0x2dd0 #define MGA_WR53 0x2dd4 #define MGA_WR54 0x2dd8 #define MGA_WR55 0x2ddc #define MGA_WR56 0x2de0 #define MGA_WR57 0x2de4 #define MGA_WR58 0x2de8 #define MGA_WR59 0x2dec #define MGA_WR60 0x2df0 #define MGA_WR61 0x2df4 #define MGA_WR62 0x2df8 #define MGA_WR63 0x2dfc # define MGA_G400_WR_MAGIC (1 << 6) # define MGA_G400_WR56_MAGIC 0x46480000 /* 12800.0f */ #define MGA_ILOAD_ALIGN 64 #define MGA_ILOAD_MASK (MGA_ILOAD_ALIGN - 1) #define MGA_DWGCTL_FLUSH (MGA_OPCOD_TEXTURE_TRAP | \ MGA_ATYPE_I | \ MGA_ZMODE_NOZCMP | \ MGA_ARZERO | \ MGA_SGNZERO | \ MGA_BOP_SRC | \ (15 << MGA_TRANS_SHIFT)) #define MGA_DWGCTL_CLEAR (MGA_OPCOD_TRAP | \ MGA_ZMODE_NOZCMP | \ MGA_SOLID | \ MGA_ARZERO | \ MGA_SGNZERO | \ MGA_SHIFTZERO | \ MGA_BOP_SRC | \ (0 << MGA_TRANS_SHIFT) | \ MGA_BLTMOD_BMONOLEF | \ MGA_TRANSC | \ MGA_CLIPDIS) #define MGA_DWGCTL_COPY (MGA_OPCOD_BITBLT | \ MGA_ATYPE_RPL | \ MGA_SGNZERO | \ MGA_SHIFTZERO | \ MGA_BOP_SRC | \ (0 << MGA_TRANS_SHIFT) | \ MGA_BLTMOD_BFCOL | \ MGA_CLIPDIS) /* Simple idle test. */ static __inline__ int mga_is_idle(drm_mga_private_t * dev_priv) { u32 status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK; return (status == MGA_ENDPRDMASTS); } #endif n504'>504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 
# Doxyfile 1.3.8

# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project
#
# All text after a hash (#) is considered a comment and will be ignored
# The format is:
#       TAG = value [value, ...]
# For lists items can also be appended using:
#       TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ")

#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------

# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
# by quotes) that should identify the project.

PROJECT_NAME           = "Direct Rendering Module"

# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
# This could be handy for archiving the generated documentation or 
# if some version control system is used.

PROJECT_NUMBER         = 

# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
# base path where the generated documentation will be put. 
# If a relative path is entered, it will be relative to the location 
# where doxygen was started. If left blank the current directory will be used.

OUTPUT_DIRECTORY       = 

# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
# 4096 sub-directories (in 2 levels) under the output directory of each output 
# format and will distribute the generated files over these directories. 
# Enabling this option can be useful when feeding doxygen a huge amount of source 
# files, where putting all generated files in the same directory would otherwise 
# cause performance problems for the file system.

CREATE_SUBDIRS         = NO

# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
# documentation generated by doxygen is written. Doxygen will use this 
# information to generate all constant output in the proper language. 
# The default language is English, other supported languages are: 
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
# Swedish, and Ukrainian.

OUTPUT_LANGUAGE        = English

# This tag can be used to specify the encoding used in the generated output. 
# The encoding is not always determined by the language that is chosen, 
# but also whether or not the output is meant for Windows or non-Windows users. 
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
# forces the Windows encoding (this is the default for the Windows binary), 
# whereas setting the tag to NO uses a Unix-style encoding (the default for 
# all platforms other than Windows).

USE_WINDOWS_ENCODING   = NO

# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
# include brief member descriptions after the members that are listed in 
# the file and class documentation (similar to JavaDoc). 
# Set to NO to disable this.

BRIEF_MEMBER_DESC      = YES

# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
# the brief description of a member or function before the detailed description. 
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
# brief descriptions will be completely suppressed.

REPEAT_BRIEF           = YES

# This tag implements a quasi-intelligent brief description abbreviator 
# that is used to form the text in various listings. Each string 
# in this list, if found as the leading text of the brief description, will be 
# stripped from the text and the result after processing the whole list, is used 
# as the annotated text. Otherwise, the brief description is used as-is. If left 
# blank, the following values are used ("$name" is automatically replaced with the 
# name of the entity): "The $name class" "The $name widget" "The $name file" 
# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"

ABBREVIATE_BRIEF       = 

# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
# Doxygen will generate a detailed section even if there is only a brief 
# description.

ALWAYS_DETAILED_SEC    = NO

# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
# members of a class in the documentation of that class as if those members were 
# ordinary class members. Constructors, destructors and assignment operators of 
# the base classes will not be shown.

INLINE_INHERITED_MEMB  = NO

# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
# path before files name in the file list and in the header files. If set 
# to NO the shortest path that makes the file name unique will be used.

FULL_PATH_NAMES        = NO

# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
# can be used to strip a user-defined part of the path. Stripping is 
# only done if one of the specified strings matches the left-hand part of 
# the path. The tag can be used to show relative paths in the file list. 
# If left blank the directory from which doxygen is run is used as the 
# path to strip.

STRIP_FROM_PATH        = 

# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
# the path mentioned in the documentation of a class, which tells 
# the reader which header file to include in order to use a class. 
# If left blank only the name of the header file containing the class 
# definition is used. Otherwise one should specify the include paths that 
# are normally passed to the compiler using the -I flag.

STRIP_FROM_INC_PATH    = 

# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
# (but less readable) file names. This can be useful is your file systems 
# doesn't support long names like on DOS, Mac, or CD-ROM.

SHORT_NAMES            = NO

# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
# will interpret the first line (until the first dot) of a JavaDoc-style 
# comment as the brief description. If set to NO, the JavaDoc 
# comments will behave just like the Qt-style comments (thus requiring an 
# explicit @brief command for a brief description.

JAVADOC_AUTOBRIEF      = YES

# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
# comments) as a brief description. This used to be the default behaviour. 
# The new default is to treat a multi-line C++ comment block as a detailed 
# description. Set this tag to YES if you prefer the old behaviour instead.

MULTILINE_CPP_IS_BRIEF = NO

# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
# will output the detailed description near the top, like JavaDoc.
# If set to NO, the detailed description appears after the member 
# documentation.

DETAILS_AT_TOP         = YES

# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
# member inherits the documentation from any documented member that it 
# re-implements.

INHERIT_DOCS           = YES

# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
# tag is set to YES, then doxygen will reuse the documentation of the first 
# member in the group (if any) for the other members of the group. By default 
# all members of a group must be documented explicitly.

DISTRIBUTE_GROUP_DOC   = NO

# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
# Doxygen uses this value to replace tabs by spaces in code fragments.

TAB_SIZE               = 8

# This tag can be used to specify a number of aliases that acts 
# as commands in the documentation. An alias has the form "name=value". 
# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
# put the command \sideeffect (or @sideeffect) in the documentation, which 
# will result in a user-defined paragraph with heading "Side Effects:". 
# You can put \n's in the value part of an alias to insert newlines.

ALIASES                = 

# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
# only. Doxygen will then generate output that is more tailored for C. 
# For instance, some of the names that are used will be different. The list 
# of all members will be omitted, etc.

OPTIMIZE_OUTPUT_FOR_C  = YES

# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
# only. Doxygen will then generate output that is more tailored for Java. 
# For instance, namespaces will be presented as packages, qualified scopes 
# will look different, etc.

OPTIMIZE_OUTPUT_JAVA   = NO

# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
# the same type (for instance a group of public functions) to be put as a 
# subgroup of that type (e.g. under the Public Functions section). Set it to 
# NO to prevent subgrouping. Alternatively, this can be done per class using 
# the \nosubgrouping command.

SUBGROUPING            = YES

#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------

# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
# documentation are documented, even if no documentation was available. 
# Private class members and static file members will be hidden unless 
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

EXTRACT_ALL            = NO

# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
# will be included in the documentation.

EXTRACT_PRIVATE        = YES

# If the EXTRACT_STATIC tag is set to YES all static members of a file 
# will be included in the documentation.

EXTRACT_STATIC         = YES

# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
# defined locally in source files will be included in the documentation. 
# If set to NO only classes defined in header files are included.

EXTRACT_LOCAL_CLASSES  = YES

# This flag is only useful for Objective-C code. When set to YES local 
# methods, which are defined in the implementation section but not in 
# the interface are included in the documentation. 
# If set to NO (the default) only methods in the interface are included.

EXTRACT_LOCAL_METHODS  = NO

# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
# undocumented members of documented classes, files or namespaces. 
# If set to NO (the default) these members will be included in the 
# various overviews, but no documentation section is generated. 
# This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_MEMBERS     = NO

# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
# undocumented classes that are normally visible in the class hierarchy. 
# If set to NO (the default) these classes will be included in the various 
# overviews. This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_CLASSES     = NO

# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
# friend (class|struct|union) declarations. 
# If set to NO (the default) these declarations will be included in the 
# documentation.

HIDE_FRIEND_COMPOUNDS  = NO

# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
# documentation blocks found inside the body of a function. 
# If set to NO (the default) these blocks will be appended to the 
# function's detailed documentation block.

HIDE_IN_BODY_DOCS      = NO

# The INTERNAL_DOCS tag determines if documentation 
# that is typed after a \internal command is included. If the tag is set 
# to NO (the default) then the documentation will be excluded. 
# Set it to YES to include the internal documentation.

INTERNAL_DOCS          = NO

# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
# file names in lower-case letters. If set to YES upper-case letters are also 
# allowed. This is useful if you have classes or files whose names only differ 
# in case and if your file system supports case sensitive file names. Windows 
# and Mac users are advised to set this option to NO.

CASE_SENSE_NAMES       = YES

# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
# will show members with their full class and namespace scopes in the 
# documentation. If set to YES the scope will be hidden.

HIDE_SCOPE_NAMES       = NO

# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
# will put a list of the files that are included by a file in the documentation 
# of that file.

SHOW_INCLUDE_FILES     = NO

# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
# is inserted in the documentation for inline members.

INLINE_INFO            = YES

# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
# will sort the (detailed) documentation of file and class members 
# alphabetically by member name. If set to NO the members will appear in 
# declaration order.

SORT_MEMBER_DOCS       = NO

# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
# brief documentation of file, namespace and class members alphabetically 
# by member name. If set to NO (the default) the members will appear in 
# declaration order.

SORT_BRIEF_DOCS        = NO

# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
# sorted by fully-qualified names, including namespaces. If set to 
# NO (the default), the class list will be sorted only by class name, 
# not including the namespace part. 
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the 
# alphabetical list.

SORT_BY_SCOPE_NAME     = NO

# The GENERATE_TODOLIST tag can be used to enable (YES) or 
# disable (NO) the todo list. This list is created by putting \todo 
# commands in the documentation.

GENERATE_TODOLIST      = YES

# The GENERATE_TESTLIST tag can be used to enable (YES) or 
# disable (NO) the test list. This list is created by putting \test 
# commands in the documentation.

GENERATE_TESTLIST      = YES

# The GENERATE_BUGLIST tag can be used to enable (YES) or 
# disable (NO) the bug list. This list is created by putting \bug 
# commands in the documentation.

GENERATE_BUGLIST       = YES

# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
# disable (NO) the deprecated list. This list is created by putting 
# \deprecated commands in the documentation.

GENERATE_DEPRECATEDLIST= YES

# The ENABLED_SECTIONS tag can be used to enable conditional 
# documentation sections, marked by \if sectionname ... \endif.

ENABLED_SECTIONS       = 

# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
# the initial value of a variable or define consists of for it to appear in 
# the documentation. If the initializer consists of more lines than specified 
# here it will be hidden. Use a value of 0 to hide initializers completely. 
# The appearance of the initializer of individual variables and defines in the 
# documentation can be controlled using \showinitializer or \hideinitializer 
# command in the documentation regardless of this setting.

MAX_INITIALIZER_LINES  = 30

# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
# at the bottom of the documentation of classes and structs. If set to YES the 
# list will mention the files that were used to generate the documentation.

SHOW_USED_FILES        = YES

#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------

# The QUIET tag can be used to turn on/off the messages that are generated 
# by doxygen. Possible values are YES and NO. If left blank NO is used.

QUIET                  = YES

# The WARNINGS tag can be used to turn on/off the warning messages that are 
# generated by doxygen. Possible values are YES and NO. If left blank 
# NO is used.

WARNINGS               = YES

# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
# automatically be disabled.

WARN_IF_UNDOCUMENTED   = NO

# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
# potential errors in the documentation, such as not documenting some 
# parameters in a documented function, or documenting parameters that 
# don't exist or using markup commands wrongly.

WARN_IF_DOC_ERROR      = YES

# The WARN_FORMAT tag determines the format of the warning messages that 
# doxygen can produce. The string should contain the $file, $line, and $text 
# tags, which will be replaced by the file and line number from which the 
# warning originated and the warning text.

WARN_FORMAT            = "$file:$line: $text"

# The WARN_LOGFILE tag can be used to specify a file to which warning 
# and error messages should be written. If left blank the output is written 
# to stderr.

WARN_LOGFILE           = 

#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------