0x12300000: 0x69040000: 3DSTATE_PIPELINE_SELECT 0x12300004: 0x790d0002: 3DSTATE_MULTISAMPLE 0x12300008: 0x00000000: dword 1 0x1230000c: 0x00000000: dword 2 0x12300010: 0x00000000: dword 3 0x12300014: 0x78180000: 3DSTATE_SAMPLE_MASK 0x12300018: 0x00000001: dword 1 0x1230001c: 0x61020000: STATE_SIP 0x12300020: 0x00000000: dword 1 0x12300024: 0x680b0000: 3DSTATE_VF_STATISTICS 0x12300028: 0x61010008: STATE_BASE_ADDRESS 0x1230002c: 0x00000001: general state base address 0x00000000 0x12300030: 0x091ba001: surface state base address 0x091ba000 0x12300034: 0x091ba001: dynamic state base address 0x091ba000 0x12300038: 0x00000001: indirect state base address 0x00000000 0x1230003c: 0x091c2001: instruction state base address 0x091c2000 0x12300040: 0x00000001: general state upper bound disabled 0x12300044: 0x091c2001: dynamic state upper bound 0x091c2000 0x12300048: 0x00000001: indirect state upper bound disabled 0x1230004c: 0x00000001: instruction state upper bound disabled 0x12300050: 0x78230000: 3DSTATE_VIEWPORT_STATE_POINTERS_CC 0x12300054: 0x00007fe0: pointer to CC viewport 0x12300058: 0x78210000: 3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP 0x1230005c: 0x00007f80: pointer to SF_CLIP viewport 0x12300060: 0x78300000: 3DSTATE_URB_VS 0x12300064: 0x040002c0: 16KB start, size=1 64B rows, nr_entries=704, total size 45056B 0x12300068: 0x78330000: 3DSTATE_URB_GS 0x1230006c: 0x04000000: 16KB start, size=1 64B rows, nr_entries=0, total size 0B 0x12300070: 0x78310000: 3DSTATE_URB_HS 0x12300074: 0x04000000: 16KB start, size=1 64B rows, nr_entries=0, total size 0B 0x12300078: 0x78320000: 3DSTATE_URB_DS 0x1230007c: 0x04000000: 16KB start, size=1 64B rows, nr_entries=0, total size 0B 0x12300080: 0x78240000: 3DSTATE_BLEND_STATE_POINTERS 0x12300084: 0x00007f41: pointer to BLEND_STATE at 0x00007f40 (changed) 0x12300088: 0x780e0000: 3DSTATE_CC_STATE_POINTERS 0x1230008c: 0x00007f01: pointer to COLOR_CALC_STATE at 0x00007f00 (changed) 0x12300090: 0x78250000: 3DSTATE_DEPTH_STENCIL_STATE_POINTERS 0x12300094: 0x00007ec1: pointer to DEPTH_STENCIL_STATE at 0x00007ec0 (changed) 0x12300098: 0x78160005: 3DSTATE_CONSTANT_GS 0x1230009c: 0x00000000: len 0 = 0, len 1 = 0 0x123000a0: 0x00000000: len 2 = 0, len 3 = 0 0x123000a4: 0x00000000: pointer to constbuf 0 0x123000a8: 0x00000000: pointer to constbuf 1 0x123000ac: 0x00000000: pointer to constbuf 2 0x123000b0: 0x00000000: pointer to constbuf 3 0x123000b4: 0x78110005: 3DSTATE_GS 0x123000b8: 0x00000000: kernel pointer 0x123000bc: 0x00000000: SPF=0, VME=0, Sampler Count 0, Binding table count 0 0x123000c0: 0x00000000: scratch offset 0x123000c4: 0x00000401: Dispatch GRF start 1, VUE read length 0, VUE read offset 0 0x123000c8: 0x00000400: Max Threads 1, Rendering disable 0x123000cc: 0x00000000: Reorder disable, Discard Adjaceny disable, GS disable 0x123000d0: 0x78290000: 3DSTATE_BINDING_TABLE_POINTERS_GS 0x123000d4: 0x00000000: dword 1 0x123000d8: 0x78190005: 3DSTATE_CONSTANT_HS 0x123000dc: 0x00000000: len 0 = 0, len 1 = 0 0x123000e0: 0x00000000: len 2 = 0, len 3 = 0 0x123000e4: 0x00000000: pointer to constbuf 0 0x123000e8: 0x00000000: pointer to constbuf 1 0x123000ec: 0x00000000: pointer to constbuf 2 0x123000f0: 0x00000000: pointer to constbuf 3 0x123000f4: 0x781b0005: 3DSTATE_HS 0x123000f8: 0x00000000: dword 1 0x123000fc: 0x00000000: dword 2 0x12300100: 0x00000000: dword 3 0x12300104: 0x00000000: dword 4 0x12300108: 0x00000000: dword 5 0x1230010c: 0x00000000: dword 6 0x12300110: 0x78270000: 3DSTATE_BINDING_TABLE_POINTERS_HS 0x12300114: 0x00000000: dword 1 0x12300118: 0x781c0002: 3DSTATE_TE 0x1230011c: 0x00000000: dword 1 0x12300120: 0x00000000: dword 2 0x12300124: 0x00000000: dword 3 0x12300128: 0x781a0005: 3DSTATE_CONSTANT_DS 0x1230012c: 0x00000000: len 0 = 0, len 1 = 0 0x12300130: 0x00000000: len 2 = 0, len 3 = 0 0x12300134: 0x00000000: pointer to constbuf 0 0x12300138: 0x00000000: pointer to constbuf 1 0x1230013c: 0x00000000: pointer to constbuf 2 0x12300140: 0x00000000: pointer to constbuf 3 0x12300144: 0x781d0004: 3DSTATE_DS 0x12300148: 0x00000000: dword 1 0x1230014c: 0x00000000: dword 2 0x12300150: 0x00000000: dword 3 0x12300154: 0x00000000: dword 4 0x12300158: 0x00000000: dword 5 0x1230015c: 0x78280000: 3DSTATE_BINDING_TABLE_POINTERS_DS 0x12300160: 0x00000000: dword 1 0x12300164: 0x78260000: 3DSTATE_BINDING_TABLE_POINTERS_VS 0x12300168: 0x00007c40: dword 1 0x1230016c: 0x782b0000: 3DSTATE_SAMPLER_STATE_POINTERS_VS 0x12300170: 0x00007c20: dword 1 0x12300174: 0x79120000: 3DSTATE_PUSH_CONSTANT_ALLOC_VS 0x12300178: 0x00000008: dword 1 0x1230017c: 0x78150005: 3DSTATE_CONSTANT_VS 0x12300180: 0x00000002: len 0 = 2, len 1 = 0 0x12300184: 0x00000000: len 2 = 0, len 3 = 0 0x12300188: 0x00007e00: pointer to constbuf 0 0x1230018c: 0x00000000: pointer to constbuf 1 0x12300190: 0x00000000: pointer to constbuf 2 0x12300194: 0x00000000: pointer to constbuf 3 0x12300198: 0x78100004: 3DSTATE_VS 0x1230019c: 0x00000000: kernel pointer 0x123001a0: 0x08000000: SPF=0, VME=0, Sampler Count 1, Binding table count 0 0x123001a4: 0x00000000: scratch offset 0x123001a8: 0x00100800: Dispatch GRF start 1, VUE read length 1, VUE read offset 0 0x123001ac: 0xfe000401: Max Threads 128, Vertex Cache enable, VS func enable 0x123001b0: 0x781e0001: 3DSTATE_STREAMOUT 0x123001b4: 0x00000000: dword 1 0x123001b8: 0x00000000: dword 2 0x123001bc: 0x78120002: 3DSTATE_CLIP 0x123001c0: 0x00150400: UserClip distance cull test mask 0x0 0x123001c4: 0x98000026: Clip enable, API mode OGL, Viewport XY test enable, Viewport Z test enable, Guardband test disable, Clip mode 0, Perspective Divide enable, Non-Perspective Barycentric disable, Tri Provoking 2, Line Provoking 1, Trifan Provoking 2 0x123001c8: 0x0003ffe0: Min PointWidth 1, Max PointWidth 2047, Force Zero RTAIndex enable, Max VPIndex 0 0x123001cc: 0x781f000c: 3DSTATE_SBE 0x123001d0: 0x00600810: dword 1 0x123001d4: 0x00000000: dword 2 0x123001d8: 0x00000000: dword 3 0x123001dc: 0x00000000: dword 4 0x123001e0: 0x00000000: dword 5 0x123001e4: 0x00000000: dword 6 0x123001e8: 0x00000000: dword 7 0x123001ec: 0x00000000: dword 8 0x123001f0: 0x00000000: dword 9 0x123001f4: 0x00000000: dword 10 0x123001f8: 0x00000000: dword 11 0x123001fc: 0x00000000: dword 12 0x12300200: 0x00000000: dword 13 0x12300204: 0x78130005: 3DSTATE_SF 0x12300208: 0x00001403: dword 1 0x1230020c: 0x22000000: dword 2 0x12300210: 0x4c000808: dword 3 0x12300214: 0x00000000: dword 4 0x12300218: 0x00000000: dword 5 0x1230021c: 0x00000000: dword 6 0x12300220: 0x78140001: 3DSTATE_WM 0x12300224: 0xa0000840: (PP ), point UR 0x12300228: 0x00000000: MS 0x1230022c: 0x782a0000: 3DSTATE_BINDING_TABLE_POINTERS_PS 0x12300230: 0x00007c40: dword 1 0x12300234: 0x782f0000: 3DSTATE_SAMPLER_STATE_POINTERS_PS 0x12300238: 0x00007c20: dword 1 0x1230023c: 0x79160000: 3DSTATE_PUSH_CONSTANT_ALLOC_PS 0x12300240: 0x00080008: dword 1 0x12300244: 0x78170005: 3DSTATE_CONSTANT_PS 0x12300248: 0x00000000: len 0 = 0, len 1 = 0 0x1230024c: 0x00000000: len 2 = 0, len 3 = 0 0x12300250: 0x00000000: pointer to constbuf 0 0x12300254: 0x00000000: pointer to constbuf 1 0x12300258: 0x00000000: pointer to constbuf 2 0x1230025c: 0x00000000: pointer to constbuf 3 0x12300260: 0x78200006: 3DSTATE_PS 0x12300264: 0x00000140: dword 1 0x12300268: 0x08000000: dword 2 0x1230026c: 0x00000000: dword 3 0x12300270: 0x55000403: dword 4 0x12300274: 0x00040006: dword 5 0x12300278: 0x00000000: dword 6 0x1230027c: 0x00000240: dword 7 0x12300280: 0x780f0000: 3DSTATE_SCISSOR_POINTERS 0x12300284: 0x00007be0: scissor rect offset 0x12300288: 0x7a000002: PIPE_CONTROL 0x1230028c: 0x00002000: no write, depth stall, 0x12300290: 0x00000000: 0x12300294: 0x00000000: 0x12300298: 0x7a000002: PIPE_CONTROL 0x1230029c: 0x00000001: no write, depth cache flush, 0x123002a0: 0x00000000: 0x123002a4: 0x00000000: 0x123002a8: 0x7a000002: PIPE_CONTROL 0x123002ac: 0x00002000: no write, depth stall, 0x123002b0: 0x00000000: 0x123002b4: 0x00000000: 0x123002b8: 0x78050005: 3DSTATE_DEPTH_BUFFER 0x123002bc: 0xe0040000: dword 1 0x123002c0: 0x00000000: dword 2 0x123002c4: 0x00000000: dword 3 0x123002c8: 0x00000000: dword 4 0x123002cc: 0x00000000: dword 5 0x123002d0: 0x00000000: dword 6 0x123002d4: 0x78070001: 3DSTATE_HIER_DEPTH_BUFFER 0x123002d8: 0x00000000: pitch 1b 0x123002dc: 0x00000000: pointer to HiZ buffer 0x123002e0: 0x78060001: 3DSTATE_STENCIL_BUFFER 0x123002e4: 0x00000000: dword 1 0x123002e8: 0x00000000: dword 2 0x123002ec: 0x78040001: 3DSTATE_CLEAR_PARAMS 0x123002f0: 0x00000000: dword 1 0x123002f4: 0x00000000: dword 2 0x123002f8: 0x79000002: 3DSTATE_DRAWING_RECTANGLE 0x123002fc: 0x00000000: top left: 0,0 0x12300300: 0x00130077: bottom right: 119,19 0x12300304: 0x00000000: origin: 0,0 0x12300308: 0x78080003: 3DSTATE_VERTEX_BUFFERS 0x1230030c: 0x00004014: buffer 0: sequential, pitch 20b 0x12300310: 0x158b3000: buffer address 0x12300314: 0x158c2fff: max index 0x12300318: 0x00000000: mbz 0x1230031c: 0x78090003: 3DSTATE_VERTEX_ELEMENTS 0x12300320: 0x02850000: buffer 0: valid, type 0x0085, src offset 0x0000 bytes 0x12300324: 0x11230000: (X, Y, 0.0, 1.0), dst offset 0x00 bytes 0x12300328: 0x02400008: buffer 0: valid, type 0x0040, src offset 0x0008 bytes 0x1230032c: 0x11130000: (X, Y, Z, 1.0), dst offset 0x00 bytes 0x12300330: 0x7b000005: 3DPRIMITIVE: 0x12300334: 0x00000007: quad list sequential 0x12300338: 0x00000004: vertex count 0x1230033c: 0x00000000: start vertex 0x12300340: 0x00000001: instance count 0x12300344: 0x00000000: start instance 0x12300348: 0x00000000: index bias 0x1230034c: 0x05000000: MI_BATCH_BUFFER_END 47 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 
# Doxyfile 1.3.8

# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project
#
# All text after a hash (#) is considered a comment and will be ignored
# The format is:
#       TAG = value [value, ...]
# For lists items can also be appended using:
#       TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ")

#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------

# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
# by quotes) that should identify the project.

PROJECT_NAME           = "Direct Rendering Module"

# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
# This could be handy for archiving the generated documentation or 
# if some version control system is used.

PROJECT_NUMBER         = 

# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
# base path where the generated documentation will be put. 
# If a relative path is entered, it will be relative to the location 
# where doxygen was started. If left blank the current directory will be used.

OUTPUT_DIRECTORY       = 

# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
# 4096 sub-directories (in 2 levels) under the output directory of each output 
# format and will distribute the generated files over these directories. 
# Enabling this option can be useful when feeding doxygen a huge amount of source 
# files, where putting all generated files in the same directory would otherwise 
# cause performance problems for the file system.

CREATE_SUBDIRS         = NO

# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
# documentation generated by doxygen is written. Doxygen will use this 
# information to generate all constant output in the proper language. 
# The default language is English, other supported languages are: 
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
# Swedish, and Ukrainian.

OUTPUT_LANGUAGE        = English

# This tag can be used to specify the encoding used in the generated output. 
# The encoding is not always determined by the language that is chosen, 
# but also whether or not the output is meant for Windows or non-Windows users. 
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
# forces the Windows encoding (this is the default for the Windows binary), 
# whereas setting the tag to NO uses a Unix-style encoding (the default for 
# all platforms other than Windows).

USE_WINDOWS_ENCODING   = NO

# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
# include brief member descriptions after the members that are listed in 
# the file and class documentation (similar to JavaDoc). 
# Set to NO to disable this.

BRIEF_MEMBER_DESC      = YES

# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
# the brief description of a member or function before the detailed description. 
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
# brief descriptions will be completely suppressed.

REPEAT_BRIEF           = YES

# This tag implements a quasi-intelligent brief description abbreviator 
# that is used to form the text in various listings. Each string 
# in this list, if found as the leading text of the brief description, will be 
# stripped from the text and the result after processing the whole list, is used 
# as the annotated text. Otherwise, the brief description is used as-is. If left 
# blank, the following values are used ("$name" is automatically replaced with the 
# name of the entity): "The $name class" "The $name widget" "The $name file" 
# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"

ABBREVIATE_BRIEF       = 

# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
# Doxygen will generate a detailed section even if there is only a brief 
# description.

ALWAYS_DETAILED_SEC    = NO

# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
# members of a class in the documentation of that class as if those members were 
# ordinary class members. Constructors, destructors and assignment operators of 
# the base classes will not be shown.

INLINE_INHERITED_MEMB  = NO

# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
# path before files name in the file list and in the header files. If set 
# to NO the shortest path that makes the file name unique will be used.

FULL_PATH_NAMES        = NO

# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
# can be used to strip a user-defined part of the path. Stripping is 
# only done if one of the specified strings matches the left-hand part of 
# the path. The tag can be used to show relative paths in the file list. 
# If left blank the directory from which doxygen is run is used as the 
# path to strip.

STRIP_FROM_PATH        = 

# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
# the path mentioned in the documentation of a class, which tells 
# the reader which header file to include in order to use a class. 
# If left blank only the name of the header file containing the class 
# definition is used. Otherwise one should specify the include paths that 
# are normally passed to the compiler using the -I flag.

STRIP_FROM_INC_PATH    = 

# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
# (but less readable) file names. This can be useful is your file systems 
# doesn't support long names like on DOS, Mac, or CD-ROM.

SHORT_NAMES            = NO

# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
# will interpret the first line (until the first dot) of a JavaDoc-style 
# comment as the brief description. If set to NO, the JavaDoc 
# comments will behave just like the Qt-style comments (thus requiring an 
# explicit @brief command for a brief description.

JAVADOC_AUTOBRIEF      = YES

# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
# comments) as a brief description. This used to be the default behaviour. 
# The new default is to treat a multi-line C++ comment block as a detailed 
# description. Set this tag to YES if you prefer the old behaviour instead.

MULTILINE_CPP_IS_BRIEF = NO

# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
# will output the detailed description near the top, like JavaDoc.
# If set to NO, the detailed description appears after the member 
# documentation.

DETAILS_AT_TOP         = YES

# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
# member inherits the documentation from any documented member that it 
# re-implements.

INHERIT_DOCS           = YES

# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
# tag is set to YES, then doxygen will reuse the documentation of the first 
# member in the group (if any) for the other members of the group. By default 
# all members of a group must be documented explicitly.

DISTRIBUTE_GROUP_DOC   = NO

# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
# Doxygen uses this value to replace tabs by spaces in code fragments.

TAB_SIZE               = 8

# This tag can be used to specify a number of aliases that acts 
# as commands in the documentation. An alias has the form "name=value". 
# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
# put the command \sideeffect (or @sideeffect) in the documentation, which 
# will result in a user-defined paragraph with heading "Side Effects:". 
# You can put \n's in the value part of an alias to insert newlines.

ALIASES                = 

# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
# only. Doxygen will then generate output that is more tailored for C. 
# For instance, some of the names that are used will be different. The list 
# of all members will be omitted, etc.

OPTIMIZE_OUTPUT_FOR_C  = YES

# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
# only. Doxygen will then generate output that is more tailored for Java. 
# For instance, namespaces will be presented as packages, qualified scopes 
# will look different, etc.

OPTIMIZE_OUTPUT_JAVA   = NO

# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
# the same type (for instance a group of public functions) to be put as a 
# subgroup of that type (e.g. under the Public Functions section). Set it to 
# NO to prevent subgrouping. Alternatively, this can be done per class using 
# the \nosubgrouping command.

SUBGROUPING            = YES

#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------

# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
# documentation are documented, even if no documentation was available. 
# Private class members and static file members will be hidden unless 
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

EXTRACT_ALL            = NO

# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
# will be included in the documentation.

EXTRACT_PRIVATE        = YES

# If the EXTRACT_STATIC tag is set to YES all static members of a file 
# will be included in the documentation.

EXTRACT_STATIC         = YES

# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
# defined locally in source files will be included in the documentation. 
# If set to NO only classes defined in header files are included.

EXTRACT_LOCAL_CLASSES  = YES

# This flag is only useful for Objective-C code. When set to YES local 
# methods, which are defined in the implementation section but not in 
# the interface are included in the documentation. 
# If set to NO (the default) only methods in the interface are included.

EXTRACT_LOCAL_METHODS  = NO

# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
# undocumented members of documented classes, files or namespaces. 
# If set to NO (the default) these members will be included in the 
# various overviews, but no documentation section is generated. 
# This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_MEMBERS     = NO

# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
# undocumented classes that are normally visible in the class hierarchy. 
# If set to NO (the default) these classes will be included in the various 
# overviews. This option has no effect if EXTRACT_ALL is enabled.

HIDE_UNDOC_CLASSES     = NO

# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
# friend (class|struct|union) declarations. 
# If set to NO (the default) these declarations will be included in the 
# documentation.

HIDE_FRIEND_COMPOUNDS  = NO

# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
# documentation blocks found inside the body of a function. 
# If set to NO (the default) these blocks will be appended to the 
# function's detailed documentation block.

HIDE_IN_BODY_DOCS      = NO

# The INTERNAL_DOCS tag determines if documentation 
# that is typed after a \internal command is included. If the tag is set 
# to NO (the default) then the documentation will be excluded. 
# Set it to YES to include the internal documentation.

INTERNAL_DOCS          = NO

# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
# file names in lower-case letters. If set to YES upper-case letters are also 
# allowed. This is useful if you have classes or files whose names only differ 
# in case and if your file system supports case sensitive file names. Windows 
# and Mac users are advised to set this option to NO.

CASE_SENSE_NAMES       = YES

# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
# will show members with their full class and namespace scopes in the 
# documentation. If set to YES the scope will be hidden.

HIDE_SCOPE_NAMES       = NO

# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
# will put a list of the files that are included by a file in the documentation 
# of that file.

SHOW_INCLUDE_FILES     = NO

# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
# is inserted in the documentation for inline members.

INLINE_INFO            = YES

# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
# will sort the (detailed) documentation of file and class members 
# alphabetically by member name. If set to NO the members will appear in 
# declaration order.

SORT_MEMBER_DOCS       = NO

# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
# brief documentation of file, namespace and class members alphabetically 
# by member name. If set to NO (the default) the members will appear in 
# declaration order.

SORT_BRIEF_DOCS        = NO

# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
# sorted by fully-qualified names, including namespaces. If set to 
# NO (the default), the class list will be sorted only by class name, 
# not including the namespace part. 
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the 
# alphabetical list.

SORT_BY_SCOPE_NAME     = NO

# The GENERATE_TODOLIST tag can be used to enable (YES) or 
# disable (NO) the todo list. This list is created by putting \todo 
# commands in the documentation.

GENERATE_TODOLIST      = YES

# The GENERATE_TESTLIST tag can be used to enable (YES) or 
# disable (NO) the test list. This list is created by putting \test 
# commands in the documentation.

GENERATE_TESTLIST      = YES

# The GENERATE_BUGLIST tag can be used to enable (YES) or 
# disable (NO) the bug list. This list is created by putting \bug 
# commands in the documentation.

GENERATE_BUGLIST       = YES

# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
# disable (NO) the deprecated list. This list is created by putting 
# \deprecated commands in the documentation.

GENERATE_DEPRECATEDLIST= YES

# The ENABLED_SECTIONS tag can be used to enable conditional 
# documentation sections, marked by \if sectionname ... \endif.

ENABLED_SECTIONS       = 

# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
# the initial value of a variable or define consists of for it to appear in 
# the documentation. If the initializer consists of more lines than specified 
# here it will be hidden. Use a value of 0 to hide initializers completely. 
# The appearance of the initializer of individual variables and defines in the 
# documentation can be controlled using \showinitializer or \hideinitializer 
# command in the documentation regardless of this setting.

MAX_INITIALIZER_LINES  = 30

# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
# at the bottom of the documentation of classes and structs. If set to YES the 
# list will mention the files that were used to generate the documentation.

SHOW_USED_FILES        = YES

#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------

# The QUIET tag can be used to turn on/off the messages that are generated 
# by doxygen. Possible values are YES and NO. If left blank NO is used.

QUIET                  = YES

# The WARNINGS tag can be used to turn on/off the warning messages that are 
# generated by doxygen. Possible values are YES and NO. If left blank 
# NO is used.

WARNINGS               = YES

# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
# automatically be disabled.

WARN_IF_UNDOCUMENTED   = NO

# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
# potential errors in the documentation, such as not documenting some 
# parameters in a documented function, or documenting parameters that 
# don't exist or using markup commands wrongly.

WARN_IF_DOC_ERROR      = YES

# The WARN_FORMAT tag determines the format of the warning messages that 
# doxygen can produce. The string should contain the $file, $line, and $text 
# tags, which will be replaced by the file and line number from which the 
# warning originated and the warning text.

WARN_FORMAT            = "$file:$line: $text"

# The WARN_LOGFILE tag can be used to specify a file to which warning 
# and error messages should be written. If left blank the output is written 
# to stderr.

WARN_LOGFILE           = 

#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------

# The INPUT tag can be used to specify the files and/or directories that contain 
# documented source files. You may enter file names like "myfile.cpp" or 
# directories like "/usr/src/myproject". Separate the files or directories 
# with spaces.

INPUT                  = . \
                         ../shared-core

# If the value of the INPUT tag contains directories, you can use the 
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
# and *.h) to filter out the source-files in the directories. If left 
# blank the following patterns are tested: 
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm

FILE_PATTERNS          = *.c \
                         *.h

# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
# should be searched for input files as well. Possible values are YES and NO. 
# If left blank NO is used.

RECURSIVE              = NO

# The EXCLUDE tag can be used to specify files and/or directories that should 
# excluded from the INPUT source files. This way you can easily exclude a 
# subdirectory from a directory tree whose root is specified with the INPUT tag.

EXCLUDE                = 

# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories 
# that are symbolic links (a Unix filesystem feature) are excluded from the input.

EXCLUDE_SYMLINKS       = YES

# If the value of the INPUT tag contains directories, you can use the 
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
# certain files from those directories.

EXCLUDE_PATTERNS       = 

# The EXAMPLE_PATH tag can be used to specify one or more files or 
# directories that contain example code fragments that are included (see 
# the \include command).

EXAMPLE_PATH           = 

# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
# and *.h) to filter out the source-files in the directories. If left 
# blank all files are included.

EXAMPLE_PATTERNS       = 

# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
# searched for input files to be used with the \include or \dontinclude 
# commands irrespective of the value of the RECURSIVE tag. 
# Possible values are YES and NO. If left blank NO is used.

EXAMPLE_RECURSIVE      = NO

# The IMAGE_PATH tag can be used to specify one or more files or